home // Computer // Modem
1. Modem Installation 2. Next you will need to configure your ...
Source: help.westelcom.com
File Size: 180.76 KB
Page: 3 pages
Category: Computer
Last Download : 34 days 22 hours 59 minutes ago
Share this info:
Short Description: Modem Installation. Important Note: Do NOT install your modem until you are notified by Westelcom that ... installation of this client. Tango will run on ...
Content Inside: 1. Modem Installation
Important Note: Do NOT install your modem until you are notified by Westelcom that your DSL service is ready. 1. Filters should be connected to any phone lines that aren't attached to the DSL modem directly. You may not need a filter on your line if you do not hear any static on the line. If you have a splitter, than the same line that is attached to your DSL modem can be split for a phone extension as well. 2. Remove all the contents from the box. 3. Connect the AC power adapter to the circle end of it to the modem (1) and the other end to the wall outlet. 4. Connect one end of the phone cord to the modem on the back labeled DSL (4), and the other to a phone jack in the wall. 5. Connect one end of an Ethernet cable (one that looks like a phone cord but bigger) to the back of the modem (3) and the other end to the jack of your Ethernet port on your computer. (The Ethernet port is the one that looks like a phone jack only bigger.) 6. Turn your modem and computer on. 7. The DSL light will blink as it is searching for the DSL service. Once the light is solid the DSL is up. 8. The PC light will be solid when your computer is turned on, signifying that your Ethernet port is connected to the DSL modem successfully Back of your modem will look like this.
A. Instructions for Windows 95, 98, ME. 1. Go to Start > Settings> Control Panel. 2. Double click on Network (If you use Windows ME double click Network & Dial-Up Connections, right click Local Area Connection and select Properties). 3. Select the TCP/IP that is associated with your network card (You do not want to select the one that says TCP/IP Dial Up Adapter) Highlight and click Properties. 4. Select Obtain IP Address automatically. 5. Click on the Gateway Tab. Remove all information, if it is empty, proceed. 6. Click the DNS Configuration Tab and select Disable DNS. 8. Click OK, then OK again. Restart your computer if you are prompted to do so. B. Instructions for Windows 2000, and XP. 1.Click on the Start Menu. 2. Select Control Panels. 3. Double Click on Network Connections. 4. Right Click on Local Area Connection and select Properties. 5. Click on Internet Protocol (TCP/IP) and select properties. 6. Make sure the button is checked that says `Obtain an IP automatically' and `Obtain DNS server address automatically'. 7. Click `OK'. 8. Close the windows. Broadband Installation Software Windows 95, 98, ME, 2000, (XP-See Below). 1. Insert the `Westelcom Installation CD'.
2. Next you will need to configure your Network Settings & Install your Broadband Software.
Choose A or B based on your Windows system version.
2. Select the `Westelcom DSL Installer' option and follow the steps to Install the Tango PPPOE software. Restart your computer. 3. Upon Restart, double click the `Tango Manager' icon on your desktop.
Advertiser
