home // Motorcycle // Kawasaki
INSTALLATION PROCEDURES KAWASAKI PRAIRIE 650/700
Source: www.elkasuspension.com
File Size: 767.21 KB
Page: 4 pages
Category: Motorcycle
Last Download : 7 days 22 hours 55 minutes ago
Share this info:
Short Description: You can now re-install the strutts back on the Prairie then have an enjoyable test ride. (See the Kawasaki Owners. Manual for detailed instructions). ...
Content Inside: INSTALLATION PROCEDURES KAWASAKI PRAIRIE 650/700
REAR SETUP (34.5" hose)
Banjo bolts must face towards the front of the vehicle with their attachement point towards the left side. The reservoir must be attached to the rear subframe using the provided rubber holders and metal collars. Make sure to route the hose according to the pictures. The compression adjustment knobs should be facing the back of the quad for convenient access. The rebound adjuster (compact model, adjustable using a screwdriver) located at the bottom of the shock should face the rear of the quad for convenient access. The bottom eyelet of the shock can be turned 180° if needed.
IMPORTANT NOTES, READ BEFORE INSTALLATION - Never unscrew the banjo bolts on the hoses to reorient them - Do not bend the hoses at a 90° angle - Do not route the hoses near a place where it can become clogged - Do not route the hoses near extreme heat generating parts (ie: exhaust) - Do not over tighten the metal collars on the reservoirs (torque to 6 lbs/in) - Make sure reservoir stays clear form any moving parts (ie: swingarm, chain) - Hoses must be secured to the frame using zip ties to avoid contact with moving parts - Make sure that the shock bolts and metal collars are fastened properly before riding
ELKA SUSPENSION :
1585-M, De Coulomb, Boucherville, Quebec, Canada, J4B 8J7 Phone: 450-655-4855 or 1-800-557-0552 Email: info@elkasuspension.com Web Site: www.elkasuspension.com
Fax: 450-655-2821
Rev.F-220206 / Printed in Canada
